Critical state model for structured soil

Structure is an evident determinant for macroscopic behaviors of soils. However, this is not taken into account in most constitutive models, as structure is a rather complex issue in models. For this, it is important to develop and implement simple models that can reflect this important aspect of soil behavior. This paper tried to model structured soils based on well-established concepts, such as critical state and sub-loading. Critical state is the core of the classic Cam Clay model. The sub-loading concept implies adoption of an inner (sub-loading) yield surface, according to specific hardening rules for some internal strain-like state variables. Nakai and co-workers proposed such internal variables for controlling density (ρ) and structure (ω), using a modified stress space, called t_ij. Herein, similar variables are used in the context of the better-known invariants (p and q) of the Cam Clay model. This change requires explicit adoption of a non-associated flow rule for the sub-loading surface. This is accomplished by modifying the dilatancy ratio of the Cam Clay model, as a function of the new internal variables. These modifications are described and implemented under three-dimensional (3D) conditions. The model is then applied to simulating laboratory tests under different stress paths and the results are compared to experiments reported for different types of structured soils. The good agreements show the capacity and potential of the proposed model.     

超声振动光整的EDEM数值模拟与实验研究

采用EDEM离散元分析软件对普通钝化光整实验及带有超声振动辅助光整实验进行数值模拟，仿真结果为超声振动光整加工系统的提出提供了依据。使用超声振动光整设备对平头铣刀进行钝化实验，进行了不同钝化条件下的实验研究。通过扫描电镜观察了钝化前后铣刀的表面形貌及钝圆半径的变化，分析了超声振动光整对钝化效率及效果的影响。实验结果表明，增加了超声振动钝化后的钝化效率提高了约26%，表面形貌得到较大改善。     

枞树型核电轮槽精铣刀制造技术优化设计

以枞树型叶根精铣刀为例,阐述了可换硬质合金型线刀体和刀片精铣刀的优化设计、制造工艺、建模及优化设计,进行切削过程加工策略优化和加工过程模拟,设计制造了锥柄专用工装及检测环规、磨削刀片后角专用工装,采用NUMROTO软件编制刀片加工工步。该项目研制的可换刀片精铣刀型线精度完全能达到进口铣刀水平,能满足大部分轮槽与叶根加工对型线精度的要求,可以大幅度节约刀具费用。     

膜蓄能器放能过程的传热传质特性分析

膜构架蓄能器是以中空纤维膜为基本结构，不仅能够实现蓄能，同时能够解决溴化锂溶液浓度差蓄能器中结晶后的放能困难的问题。搭建了膜蓄能器放能过程传热传质实验测试系统，建立了应用于太阳能吸收式制冷系统中的膜架构蓄能器传热传质的三维数学模型，并利用 CFD 软件进行了求解。将计算结果与实验结果相比较，验证了该三维非稳态数学模型的可靠性。实验和仿真结果表明，质量分数为70% 的溴化锂溶液的水蒸气分子平均传质速率比质量分数为60%的溶液高44.03%；当蒸发温度从4.5℃提高到12.3℃时，水蒸气分子的平均传质速率将提高108.34%；当膜通道的有效长度从80 mm减少到30 mm时，水蒸气分子的传质速率会提高40.77%。     

Using hybridized ANN-GA prediction method for DOE performed drying experiments

Abstract

Coal is an important component in the energy industry and plays a key role in energy-producing facilities. Moisture is a common condition that has a considerable impact on coal. Coal drying has long been a question of great interest in a wide range of fields. Defining parameters in the coal drying is obtained by experiments. High costs, time constraints, and repetition of an experiment are one of the most frequently stated problems with experimental works. Using qualitative methods with experiments can be more useful for identifying and characterizing the coal drying process. The purpose of this article is finding the effective parameters in the coal drying process by using a hybridized prediction method. Genetic Algorithm (GA) and Artificial Neural Network (ANN) are hybridized with each other to identify and characterize the coal drying process. GA-ANN algorithm is applied to the coal drying process to predict the moisture of coal, but it does not provide a decent result at first. Later, the Design of Experiment (DoE) methodology is performed to determine the main effects of six parameters. Two scenarios are generated because two parameters are not statistically significant. The first scenario excludes the air relative humidity parameter, and the second scenario excludes the air relative humidity and the velocity of air parameters. Following the application of the DoE method, GA-ANN reaches decent results in scenario-2.     

萃取塔数学模型及过程强化的若干研究进展

萃取塔因生产能力大、占地面积小、密闭性好等优点，在石油、化工、生物、医药和环境工程等多领域被广泛应用。本文从以下几个方面介绍了萃取塔近些年的研究进展：综述了传统萃取塔（脉冲萃取塔、转盘塔与Kühni塔等）的水力学、轴向扩散与传质模型的发展，分析比较了表面张力、传质方向、放大效应等因素对模型的影响；介绍了计算流体动力学（CFD）在萃取塔中单液滴、单相流模拟、液-液两相流模拟、外加能量模拟、与群体平衡模型（PBM）耦合模拟中的应用进展；介绍了国内外设计开发的新型萃取塔，包括改变传统塔的内构件和引入多种外场能量等方式来强化相间传质。研究表明，将先进实验研究方法、准确经验模型和可靠理论计算相结合，将会是萃取塔研究的重要手段和方向。     

Measurement of Consumed Energy Due to the Two-Phase Pressure Drop in a Pulsed Semi-Industrial Column: Effect of Geometry

This article deals with the evaluation of pressure drop and consumption of energy for a steady-state solvent extraction in a horizontal pulsed sieve-plate column, which are important for the design and optimization of the periodic-flow processes for industrial applications. In this study, the pressure drop and the position of loading points are investigated. Moreover, a mathematical evaluation on the energy consumption in the case of a pulsed flow is conducted, and besides the influence of pulsation intensity, the effect of geometrical parameters including the plate spacing and plate-free area is investigated as well. The results of this study are helpful for optimization of column geometry targeted to higher performance and lower energy consumption.